Item Tag: 1-3/4"

3.5K Trailer Axle 5 lug 62″ Hub Face 48″ Spring Center 5 on 4.5″ w/ leaf Springs

This listing is for one (1) 3500 lbs trailer axle 62″ HF / 48″ SC, 5 ON 4.5″ Bolt Pattern with two (2) 4 leaf double eye springs 3500 lbs trailer axle fully assembled with 5×4.5″ idler hubs installed on axle, spring pads welded on axle, ready to install on your trailer AXLE SPECIFICATIONS: Axle Brand: Rockwell American hub face to hub face: 62″ Spring center to spring center: 48″ bolt pattern: 5×4.5 Trailer Frame Width: 50″ Country Assembled: The U.S.A. Capacity Per Axle (LBS): 3,500 Stud Size: 1/2″ Hubs: 5 Lug Idler Hubs Spindles: #84 Spindle Size: 1-1/16″ Axle Tubing Diameter (Inch): 2 3/8″ Axle Tubing Thickness: .180″ Lubrication: EZ-Grease Zerks in Spindles Spring Pads: Welded on Axle Brake Flange: 4 Bolt Welded on Axle Pre-Greased: Yes Inner Bearing: L68149 Outer Bearing: L44649 Suspension: Leaf Spring Cambered: Yes Under-slung: Yes (the axle sits on top of the springs) FULLY ASSEMBLED, READY TO INSTALL ON TRAILER. Bearing, Race, and Seal Information: Bearings: Inner Bearing – L68149 Outer Bearing: L44649 Seal: 10-19 EZ-Lube: 1.719″ Inner Diameter. 2.565″ Outer diameter. Races Inner Race: L68111 OUTER RACE: L44610 Grease Cap: 1.98′ Outer Diameter – EZ-Lube with Rubber Plug Spindle: EZ Lube Features:Axle Beam Acts as part of your trailer Suspension for hauling loads. Great for replacing an old axle or bent damaged axle on your trailer Made of High Strength Steel Under-slung axle design: spring pads are welded to the underside of the axle for mounting leaf springs. Spring pads are welded on the trailer axle for your convenience. The 5 lug hubs are assembled on the axle with the bearings, seals, pre-greased, fully assembled for simple install on your trailer. Limited 2-year warranty Leaf Spring Specifications: Spring Type: Double eyecapacity per spring: 1,750 lbsnumber of leaves: 4Dimensions: 25-1/4″ center eye to eye, 1-3/4″ wideArch height: 3 – 3-1/4″ how to measure your trailer axle: Hub face:refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam). Spring center: is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on. how to measure your bolt pattern:Use the distance between the center of one bolt hole to the center of the bolt hole adjacent to it:If the distance is: 2-5/8″ – the bolt pattern is 5 on 4-1/22-3/4″ – the bolt pattern is 5 on 4-3/43″ – the bolt pattern is 5 on 53-1/4″ – the bolt pattern is 5 on 5-1/2 Product Description:3.5K Rockwell American 5-lug idler axle will replace Dexter, Al-Ko, Hayes, and Lippert Axles. Rockwell axles are powdered coated and made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs. The result of this under-slung design is a trailer that rides a bit lower for quick and easy loading and unloading. Each Rockwell axle is manufactured to create a certain camber angle. The camber ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer’s tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load. This Rockwell Axle is fully assembled with the proper bearings, seals, hubs, greased up ready to install on your trailer Applications:Cargo Trailer, Lowboy trailer, utility trailer, boat trailer, bbq pit trailer, horse trailer, cattle trailer, dump trailer, car hauler, custom trailer and more. This Rockwell Trailer Axle is available for pick up in Huntsville Texas at Trailer Parts Unlimited’s store, or we can ship the trailer axle right to your door. Items usually ship out 1 – 3 days after paid for. For Wholesale prices, manufactures discounts and general inquires please contact Trailer Parts Unlimited via phone or email. Trailer Parts Unlimited631 TX 75 NHuntsville TX 77320

3500 3.5K IDLER AXLE 5 LUG TRAILER CARGO DUMP UTILITY w/ SPRING U BOLT KIT

3,500 lbs Rockwell American Idler trailer axle 5 lug with two (2) 4 leaf double eye leaf springs and one (1) U-bolt kit. !!!MADE IN USA!!!! FULLY ASSEMBLED READY TO INSTALL ON TRAILER Kit Includes: (1) 3,500 lbs. trailer axle fully assembled with 5 lug idler hubs. EZ lube Grease(2) 4 leaf double eye springs 25-1/4″ long from center eye to eye. (1) 2-3/8″ U-bolt Kit This axle is ready to go. Simply drop your old axle and throw this new axle on your trailer. This is a brand new brake axle rated at 3500 lbs. AXLE SPECIFICATIONS: Country Assembled: The U.S.A. Brand: Rockwell American Capacity Per Axle (LBS): 3,500 Stud Size: 1/2″ Hubs/drums: 5 Lug Drums Spindles: #84 Spindle Size: 1-1/16″ Axle Tubing Diameter (Inch): 2 3/8″ Axle Tubing Thickness: .180″ Lubrication: EZ-Grease Zerks in Spindles Spring Pads: Welded on Axle Brake: no brakes Hubs: 5 lug idler hubs installed on axles. Brake Flange: 4 Bolt Welded on Axle Pre-Greased: Yes Inner Bearing: L68149 Outer Bearing: L44649 Suspension: Leaf Spring Cambered: Yes Under-slung: Yes (the axle sits on top of the springs) leaf spring specs: Spring type: double eyecapcity per spring: 1,750 lbsleaves: 4dimensions: 25-1/4″ length eye to eye, 1-3/4″ wideeye hole dimension: 9/16″arch height: 3.25″ 2-3/8″ U-Bolt Kit Includes:(4) 7/16″-20 x 2-3/8″ x 5-1/2″ U-Bolts(8) Nuts(2) Tie Plates FULLY ASSEMBLED, READY TO INSTALL ON TRAILER.Replaces Dexter, AL-KO, Hayes, Lippert Axles, Rockwell American, and Just about any other brand axle. Very Important to get correct axle you need please double check and triple check your bolt pattern and your spring center measurement. See below on how to properly measure axle. How to Determine what axle you need:If your building a trailer from scratch then you do not have to worry about measuring anything. Just pick the width of axle you would likeHub Face (HF):Refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle.(where the studs protrude out from the hub or where the two wheels butt up to each other)(when hubs are mounted on the beam).You can measure from one hub where the studs start on the drum, to the hub on the other side of the axle.You can also get this by measuring from where the two wheels butt together on one side of the axle to where the two wheels but up together on theother side of the axle. (This measurement is important but not a deal breaker if its a inch or so different than what we show)Spring Center (SC):is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other.This axle beam comes with the spring seats welded on.The easiest way to measure this is to have a friend help you. Have your friend hold the tape measure in the center of one spring one the axle whileyou pull the tape measure down the same axle to the other side of the axle to the center of the other spring on the same axle.This will give you your (SC) or Spring Center Measurement.If your like myself and do not have many friends to help you out. The easiest way to measure when by yourself is:Hook the tape measure on the outside of one spring, pull down the axle to the inside of the other spring on the axle axle.This will also give you your (sc) or Spring Center measurement.(This measurement is the most important measurement to get, so please double and triple check your measurement) BOLT PATTERNUse the distance between the center of one bolt hole to the center of the bolt hole adjacent to it:If the distance is:2-5/8″ – the bolt pattern is 5 on 4-1/22-3/4″ – the bolt pattern is 5 on 4-3/43″ – the bolt pattern is 5 on 53-1/4″ – the bolt pattern is 5 on 5-½(SEE DIAGRAM IN PICTURE LISTING) Fast and Free Shipping In some cases we may ask that you have a commercial address to ship to or that you pick up at the freight terminal (if you purchase multiple items) Freight Residential Delivery is available at an additional cost. OR Pick up at our distribution centerTrailer Parts Unlimited631 TX-75 NorthHuntsville TX 77320MM IN GOD WE TRUST

3.5K Trailer Axle 5 lug 89″ Hub Face 74″ Spring Center 5 on 4.5″ w/ Springs

This listing is for:one (1) 3500 lbs trailer axle 89″ HF / 74″ SC, 5 ON 4.5″ Bolt Pattern with two (2) 4 leaf double eye springs 3500 lbs trailer axle fully assembled with 5×4.5″ idler hubs installed on axle, spring pads welded on axle, ready to install on your trailer AXLE SPECIFICATIONS: Axle Brand: Rockwell American hub face to hub face: 89″ Spring center to spring center: 74″ bolt pattern: 5×4.5 Trailer Frame Width: 76″ Country Assembled: The U.S.A. Capacity Per Axle (LBS): 3,500 Stud Size: 1/2″ Hubs: 5 Lug Idler Hubs Spindles: #84 Spindle Size: 1-1/16″ Axle Tubing Diameter (Inch): 2 3/8″ Axle Tubing Thickness: .180″ Lubrication: EZ-Grease Zerks in Spindles Spring Pads: Welded on Axle Brake Flange: 4 Bolt Welded on Axle Pre-Greased: Yes Inner Bearing: L68149 Outer Bearing: L44649 Suspension: Leaf Spring Cambered: Yes Under-slung: Yes (the axle sits on top of the springs) FULLY ASSEMBLED, READY TO INSTALL ON TRAILER. Bearing, Race, and Seal Information: Bearings: Inner Bearing – L68149 Outer Bearing: L44649 Seal: 10-19 EZ-Lube: 1.719″ Inner Diameter. 2.565″ Outer diameter. Races Inner Race: L68111 OUTER RACE: L44610 Grease Cap: 1.98′ Outer Diameter – EZ-Lube with Rubber Plug Spindle: EZ Lube Features:Axle Beam Acts as part of your trailer Suspension for hauling loads. Great for replacing an old axle or bent damaged axle on your trailer Made of High Strength Steel Under-slung axle design: spring pads are welded to the underside of the axle for mounting leaf springs. Spring pads are welded on the trailer axle for your convenience. The 5 lug hubs are assembled on the axle with the bearings, seals, pre-greased, fully assembled for simple install on your trailer. Limited 2-year warranty Leaf Spring Specifications: Spring Type: Double eyecapacity per spring: 1,750 lbsnumber of leaves: 4Dimensions: 25-1/4″ center eye to eye, 1-3/4″ wideArch height: 3 – 3-1/4″ how to measure your trailer axle: Hub face:refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam). Spring center: is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on. how to measure your bolt pattern:Use the distance between the center of one bolt hole to the center of the bolt hole adjacent to it:If the distance is: 2-5/8″ – the bolt pattern is 5 on 4-1/22-3/4″ – the bolt pattern is 5 on 4-3/43″ – the bolt pattern is 5 on 53-1/4″ – the bolt pattern is 5 on 5-1/2 Product Description:3.5K Rockwell American 5-lug idler axle will replace Dexter, Al-Ko, Hayes, and Lippert Axles. Rockwell axles are powdered coated and made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs. The result of this under-slung design is a trailer that rides a bit lower for quick and easy loading and unloading. Each Rockwell axle is manufactured to create a certain camber angle. The camber ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer’s tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load. This Rockwell Axle is fully assembled with the proper bearings, seals, hubs, greased up ready to install on your trailer Applications:Cargo Trailer, Lowboy trailer, utility trailer, boat trailer, bbq pit trailer, horse trailer, cattle trailer, dump trailer, car hauler, custom trailer and more. This Rockwell Trailer Axle is available for pick up in Huntsville Texas at Trailer Parts Unlimited’s store, or we can ship the trailer axle right to your door. Items usually ship out 1 – 3 days after paid for. For Wholesale prices, manufactures discounts and general inquires please contact Trailer Parts Unlimited via phone or email. Trailer Parts Unlimited631 TX 75 NHuntsville TX 77320

3.5K Trailer Axle 5 lug 61″ Hub Face 46″ Spring Center 5 on 5″ w/ leaf Springs

This listing is for one (1) 3500 lbs trailer axle 61″ HF / 46″ SC, 5 ON 5″ Bolt Pattern with two (2) 4 leaf double eye springs 3500 lbs trailer axle fully assembled with 5×5″ idler hubs installed on axle, spring pads welded on axle, ready to install on your trailer AXLE SPECIFICATIONS: Axle Brand: Rockwell American hub face to hub face: 61″ Spring center to spring center: 46″ bolt pattern: 5×5″ Trailer Frame Width: 48″ Country Assembled: The U.S.A. Capacity Per Axle (LBS): 3,500 Stud Size: 1/2″ Hubs: 5 Lug Idler Hubs Spindles: #84 Spindle Size: 1-1/16″ Axle Tubing Diameter (Inch): 2 3/8″ Axle Tubing Thickness: .180″ Lubrication: EZ-Grease Zerks in Spindles Spring Pads: Welded on Axle Brake Flange: 4 Bolt Welded on Axle Pre-Greased: Yes Inner Bearing: L68149 Outer Bearing: L44649 Suspension: Leaf Spring Cambered: Yes Under-slung: Yes (the axle sits on top of the springs) FULLY ASSEMBLED, READY TO INSTALL ON TRAILER. Bearing, Race, and Seal Information: Bearings: Inner Bearing – L68149 Outer Bearing: L44649 Seal: 10-19 EZ-Lube: 1.719″ Inner Diameter. 2.565″ Outer diameter. Races Inner Race: L68111 OUTER RACE: L44610 Grease Cap: 1.98′ Outer Diameter – EZ-Lube with Rubber Plug Spindle: EZ Lube Features:Axle Beam Acts as part of your trailer Suspension for hauling loads. Great for replacing an old axle or bent damaged axle on your trailer Made of High Strength Steel Under-slung axle design: spring pads are welded to the underside of the axle for mounting leaf springs. Spring pads are welded on the trailer axle for your convenience. The 5 lug hubs are assembled on the axle with the bearings, seals, pre-greased, fully assembled for simple install on your trailer. Limited 2-year warranty Leaf Spring Specifications: Spring Type: Double eyecapacity per spring: 1,750 lbsnumber of leaves: 4Dimensions: 25-1/4″ center eye to eye, 1-3/4″ wideArch height: 3 – 3-1/4″ how to measure your trailer axle: Hub face:refers to the length of the axle measured from the base of one wheel stud to the base of the wheel stud on the opposite side of the axle (when hubs are mounted on the beam). Spring center: is the approximate width of your trailer. It is measured from the center of the spring seat on one side of the axle to the center of the seat on the other. This axle beam comes with the spring seats welded on. how to measure your bolt pattern:Use the distance between the center of one bolt hole to the center of the bolt hole adjacent to it:If the distance is: 2-5/8″ – the bolt pattern is 5 on 4-1/22-3/4″ – the bolt pattern is 5 on 4-3/43″ – the bolt pattern is 5 on 53-1/4″ – the bolt pattern is 5 on 5-1/2 Product Description:3.5K Rockwell American 5-lug idler axle will replace Dexter, Al-Ko, Hayes, and Lippert Axles. Rockwell axles are powdered coated and made of high-strength steel and come with spindles and spring seats welded on. The spring seats are attached to the underside of the axle so that the leaf springs. The result of this under-slung design is a trailer that rides a bit lower for quick and easy loading and unloading. Each Rockwell axle is manufactured to create a certain camber angle. The camber ensures that the angle of the wheels is correct for your towing needs. Because the primary concern when towing is maintaining controlled, in-line movement, each axle is made so that your trailer’s tires will run along the pavement evenly, with contact across the width of the tread. The result is excellent straight-line acceleration for steady, in-line tracking. You might notice the bend near the center of the axle; this is what ensures the proper camber angle. Having the center ride a bit higher and the sides of the axle bent lower allows the axle to give just enough to compensate for the load. This Rockwell Axle is fully assembled with the proper bearings, seals, hubs, greased up ready to install on your trailer Applications:Cargo Trailer, Lowboy trailer, utility trailer, boat trailer, bbq pit trailer, horse trailer, cattle trailer, dump trailer, car hauler, custom trailer and more. This Rockwell Trailer Axle is available for pick up in Huntsville Texas at Trailer Parts Unlimited’s store, or we can ship the trailer axle right to your door. Items usually ship out 1 – 3 days after paid for. For Wholesale prices, manufactures discounts and general inquires please contact Trailer Parts Unlimited via phone or email. Trailer Parts Unlimited631 TX 75 NHuntsville TX 77320 check out our website for more dealstrailerpartsunlimited com

New For 2000lbs Trailer Axle 5 lug-4.5′ 44′ Hub Face with U-Bolt Kit

Product Features: Exterior Part Type:Running Gear Part Type:Axle Condition: New Warranty: 1 Year Inner bearing: L44649 Outer bearing: L44649 Tube diameter: 45mm Wall thickness: 5mm Package includes: 1*Axle with hub kit 2*Spacer 2*Spindle Nut 2*Cotter pin 2*dust cover 1*U-bolt kit (4*U-bolt+2*plate) 2*Leaf spring bracket (not welded, to be welded by the customer as required) .

AP Products 018-314-BLK 35′ Black Plastic Slide-Out EK Base w Wiper

35′ Black Plastic Slide-Out EK Base with Wiper (018-314-BLK) by AP Products®. It’s important to make sure your weather stripping is in tip-top condition to keep water, wind, and pesky insects away from your motorhome. If it’s time to replace your old, deteriorated weather stripping, go with this top-notch product. Made from superior-grade materials to exact specifications, it will provide a flawless fit, durability, and hassle-free functionality for many trips to come. This product is fast and easy to install.