Item Tag: Mexico

SHURflo Fresh Water Pump 12v 3.5 GPM DC RV 45 psi Motorhome 2088-554-144

Shurflo on demand delivery pumps deliver reliable performance in high flow, moderate pressure applications. The Shurflo 2088-554-144 is is specifically intended to pump potable water for your RV or camper. 2088 series pumps are used in a variety of transfer and dispense on demand applications. This pump is a fully automatic diaphragm pump, ideal for high-volume applications such as vending machines for both delivery and reservoir draining. The Pump activates automatically as line pressure drops and shuts off when a preset pressure is achieved. It can be mounted in any position and are designed for easy maintenance. The materials that come in contact with the water are made of polypropylene or santoprene, which ensures that the water is safe for consumption or absorption. Shurflo 2088-554-144 Fresh Water Pump, 12 Volts, 3.5 Gallons Per Minute, 45 PsiSelf Priming up to 12 vertical lift feet (3.7m)Used in delivery and transfer applications up to 3.5 gpmNSF CertifiedPrevents back flow of fluid through the pumpsAutomatic shut-offCan run dry without damageNet Weight of 4.8lbsMax liquid temperature of 130° F

Shurflo RV Water Pump Strainer Camper (Marine) Freshwater Strainer 255-213

This Shurflo RV Water Pump Strainer is the perfect addition to your camper or marine vessel. Designed to keep your freshwater clean, this strainer is made with high-quality materials and is built to last. With a manufacturer part number of 255-213, this strainer is specifically designed for use with Shurflo water pumps. The strainer is made in Mexico and is non-domestic, making it a unique addition to your collection. It comes with no warranty, but with its high-quality construction, you can trust that it will function perfectly for a long time. This item is perfect for anyone looking for a reliable and durable strainer for their RV or marine vessel.

Trailer Floor Coating Textured Finish Water-Resistant Enclosed Trailer Floor

Ready to Use. No mixing, shaking or diluting. Easy roll on application. Water resistant. Non-slip, textured finish. Available in black (satin finish) and grey. Easy water clean-up. 1 quart covers 12 sq ft. 1 gallon covers 48 sq ft. (ENOUGH FOR 2 THICK COATS) Product cannot ship to locations experiencing temperatures less than 32 degrees. Coating must be applied and cured in temperatures of 60 degrees or higher.2 coats minimum required. Please note, using less than the required 2 coats minimum will jeopardize the integrity of the coating. Excellent adhesion on wood, painted surfaces, clean bare metals, concrete and more.Product can only ship to a physical addresses, unable to ship to PO boxes. TK64 Trailer Floor Coating is a water-based, plastic coating formulated to withstand abrasion in automotive, industrial and agricultural environments. It offers a textured slip-resistant finish in either black (satin finish) or grey. Apply with included 3/8″ foam roller. 2 coats minimum required. Excellent adhesion on metals, wood, concrete, and painted surfaces. Use only outdoors or in a well-ventilated area. TK64 should not be exposed to temperatures below 60°F during the application and the curing process. Use proper protective eyewear and clothing. DO NOT FREEZE and DO NOT STORE IN DIRECT SUN. 1-year shelf life. Excellent adhesion on plywood, treated plywood, oriented strand board (OSB) and bare wood. Ideal for 4×4 tubs, roll bars, bumpers, underbodies, wheel wells, rocker panels, trailer floors and DIY pick-up beds. New trailer floors will only require a light sweeping out before application. Used trailer floors require a more thorough cleaning with special attention to oil spots and gasoline spills. For used trailer floors, remove/replace rotted wood and splinters, fill in major cracks/holes with paintable wood putty. Clean floor with waterborne degreaser (i.e. citrus degreaser). Rinse thoroughly with hose/pressure washer and allow for the floor to completely dry. Repeated cleaning of oily spots might be necessary to ensure proper adhesion. A fan will increase air flow and reduce drying time.